Made in the USA

Home | Up | What you need know about Humidity Control

Phone 936-321-4626

ENVI SYSTEM (365 - 24-7 HUMIDITY CONTROL) PRE-ORDER PAGE

Protect your instruments from day to day humidity changes.

 

USA Humidity Daily Update for 1-2-2008 (above)

MADE IN THE USA & PROJECTED 2008 DELIVERY IN TIME FOR SUMMER NAMM 2008 IN NASHVILLE, TN

 The "4070 ENVI SYSTEM"

ADVANCE PRE-ORDER SPECIAL OFFER of $500/unit for 24 -7-365 humidity control

Our New 4070 ENVI System Humidity Control -  maintains your instruments environment continuously  at humidity levels between 40 to 70 percent by adding or removing moisture . Too high a humidity level above 70 percent is damaging as is too low a humidity below 40 percent. Continuous control avoiding high and low changes is best.

Ask any repair person about cracked and shattered finishes, top crack repairs, bridge re-glues, neck resets, and various other re-gluing, straightening, and restoration jobs. He'll probably tell you that, aside from routine maintenance items like re-fret jobs, as much as 90% of the repair business comes from thermal and humidity abuse. Even the best hard-shell case is inadequate protection when an instrument is exposed to rapid changes and extremes of temperature and humidity. 

PRE-ORDER YOUR ENVI System with a $250 (1/2 PRICE) DEPOSIT PER ENVI SYSTEM FOR JULY 2008 DELIVERY

PRODUCT: 4070 ENVI SYSTEM 2008 Delivery Pre-Order Deposit -- $250.00
[Add to Cart] 
[View Cart]

Projected delivery of these ENVI Systems is July 2008 or at such time as a 100 Pre-ordered units is achieved.

 

(Above) Phase II prototype to be reproduced in black injection molded case for commercial models.

We are excited about this product that maintains guitars within the ideal range of humidity 365 days a year eliminating the worry of damage due to rapid changes in dry or moist air.

$500* to $250* to obtain one of these first 4070 ENVI Systems to protect your instrument from humidity damage is not much to pay considering the costs and time of a repair.

Installs in either your own home or business display cabinetry or our Heritage Heirloom Case or new DUO, TRIO or QUATTRO MULTI-GUITAR FLOOR CABINETS.  (Link to Heritage Heirloom Models)

bullet

We are now taking pre-orders for the first 100 Commercial 4070 ENVI System units to be sold at $500/system.

bullet

Orders of 1 or more will gladly be accepted to enable our build of the first 100 or more commercial units

bullet

These commercial 4070's will be built  in black using "injection molding"  for 2008 delivery.

bullet

Based upon quantity of pre-orders received , the first 100 to 250 ENVI Systems will price at $500 or perhaps less, depending on quantity of pre-orders. Should Pre-Orders exceed 250 units the total price per unit will go down significantly to participants in this one time special offer.

4070 ENVI SYSTEM FEATURES: Operates on 110 or 220V  power, fully automatic, just  install desiccant bag in left side tray and add water to right side tray then plug in power. Relative humidity level can be observed at the top mounted LED digital read-out of humidity within the enclosure.

The Commercial 4070 ENVI System is a fully automatic model as shown (above) in clear acrylic as the ENVI System Phase II prototype, that now include convenient pull out trays to hold the desiccant drying agent (left tray) and water (right tray). All units operate on 110 or 220V power. Commercial units will be injection molded in a black housing.

Service your unit  once every 2-6 months!

 Every 4070 ENVI System contains a generous 2# bag of re-usable desiccant drying agent and 1 US Quart of water thereby maximizing the time between servicing

(Link to Heritage Heirloom Models)

Original 4070 ENVI System prototype (shown above) as tested at C.F. Martin Guitar Company in Nazareth, PA.

 Features added at suggestion of those at C.F. Martin Guitar Company are Pull Out trays for easy servicing to add water and replace drying agent along with relocation of the digital read-out from the front of the Prototype to the inside top.

 Have a question about Pre-ordering your 4070 ENVI System, please Contact Us, we will be glad to answer: marguerite@displayandplay.com

936-321-4626 Main line  (Monday-Saturday)

 
 

Copyright © 2002 - 2007 DISPLAY and PLAY LLC founded in 2002 is a Registered Corporation of Texas - All rights reserved. All trademarks not owned by Display and Play LLC are the property of their respective owner. Playola has been registered as a trademark of Display and Play. Display and Play is a licensed vendor to Fender Musical Instruments Corporation. Our business is the direct manufacture and sale of daily use wall mount cases for guitar, bass and other instruments. Display and Play is a current member of NAMM. Model 4070 Guitar ENVI™  and ENVI Systems are trademarks used by Display and Play LLC as is slogan Display and Play - EVERYDAY!. ΑΩ